Switch Statistics Screen
Device Statistics Menu Screens 10-5
Field Descriptions
Refer to Table 10-2 for a functional description of each screen field.
Table 10-2 Switch Statistics Screen Field Descriptions
Use this field… To…
Port #
(Read-Only)
Identify the port number. The total number of ports is dependent on the
number of fixed10/100-Mbps front panel ports and the optional HSIM
or VHSIM installed.
Frames Rcvd
(Read-Only)
See the number of frames received by the interface since the last
power-up or reset.
Frames Txmtd
(Read-Only)
See the number of frames transmitted by the interface since the last
power-up or reset.
Frames Fltrd
(Read-Only)
See the number of frames filtered by the interface since the last
power-up or reset.
Frames Frwded
(Read-Only)
See the number of frames forwarded by the interface since the last
power-up or reset.
CLEAR
COUNTERS
(Command)
Temporarily reset all counters of a screen to zero, allowing the user to
observe counter activity over a period of time. For details on how to use
this field, refer to Section 3.1.4.
To Next Page
Loading...
