Network Tools
11-2 Network Tools Screens
Screen Example
Figure 11-1 Network Tools Help Screen
The Network Tools functions are performed using a series of commands. Entering commands in
Network Tools involves typing the command to be executed at the Network Tools prompt, adding
any desired or required extensions, and pressing ENTER.
352801_01
-> help
arp
netstat
show
SPECIAL:
done, quit, or exit - Exit from the Network Tools.
For help with a specific command, type 'help <command>'.
->
Commands Available to the User:
Built in Commands:
Welcome to Network Tools
traceroute
defroute
ping
reset
bridge
lg_frame_admin
soft_reset telnet
link_trap
cdp loopback_detect
arp_learn
atm_stp_state
stpStandby
vrrpPortgigabit_port_mode
dynamic_egress
stpPort
radius
To Next Page
Loading...
