Enterasys 2H25x - Page 242

Built-in Commands
11-6 Network Tools Screens
defroute
Description: Allows the user, in the syntax order shown below, to view, set, or delete the
default IP route to a managed device through the specified interface.
Syntax: defroute
defroute [interface number] [IP address]
defroute delete [interface number] [IP address]
Options: None
Example:
-> defroute
# Default route is 147.152.42.32 on interface 2
-> defroute 2 147.152.42.32
# Default route is 147.152.42.32 on interface 2
-> defroute delete
# Default route is not currently set.
->
netstat
Description: The netstat command provides a display of general network statistics for the
managed device. The netstat command must be used with one of the
following two display options.
Syntax: netstat [option]
Options: -i – Displays status and capability information for each interface.
-r – Displays routing information for each interface.