Built-in Commands
11-18 Network Tools Screens
Example:
-> stpPort status
The following ports are STP ENABLED:
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21
-> stpPort enable 1
Enabling STP on Port 2.
-> stpPort disable 2
Disabling STP from Port 2.
lg_frame_admin
Description: Enables the changing of large frame support on a per port basis. This enables
the user to determine if large frames can be forwarded out a particular port.
Syntax: lg_frame_admin [ set ] [ LARGE | FRAG_IF_POSS | SMALL | AUTO ] [
PORT | ALL_BPLANE | ALL_FDDI ]
lg_frame_admin [ status ] [ port #]
stpPort (Continued)
To Next Page
Loading...
