Enterasys 2H25x - Page 321

Index-1
Index
Numerics
1D Trunk 7-13, 12-5, 12-31
1Q Trunk 7-13, 12-5, 12-24
802.1 Configuration Menu screen 6-2
802.1 Priority Configuration Menu screen 6-8
802.1Q switching
setting operational mode for 4-14
802.1Q switching mode
hierarchy of 3-3
802.1Q VLAN Configuration Menu screen 7-3
A
Access policy 4-22
Advanced Port Priority Configuration screen 6-13
default port priority 6-16
port 6-16
Port command 6-17, 6-21
priority 6-15
RX priority 6-15
TX priority 6-16
tx queue 6-15
Advertised ability
setting of 5-11
Age time 6-6
Assigning Ports to a VID/Classification
all at a time 7-36
one or more at a time 7-36
Assigning VID/Classification to Port VLAN
Lists 7-37
B
Broadcast Suppression Configuration screen 5-22
peak rate 5-23
port # 5-23
reset peak 5-23
threshold 5-23
time since peak 5-23
total RX 5-23
Built-in Commands
use of 11-3
C
Classification Rule
filtering traffic according to 12-42
CLEAR COUNTERS command
how to use 3-5
COM port 4-15
Command field 1-6
Command set 11-3
Configuration 12-7
Confining Network Traffic According to Priority
and VLAN 6-41
Controlling Traffic
example of 11-25
Cursor movement 1-3
D
Default gateway 4-6, 4-10
Default VLAN 12-5
Device Configuration Menu screen 4-2
Device date 4-6
Device Menu screen 3-8
Device Statistics Menu screen 10-2
Device time 4-6
Device VLAN Configuration screen 7-6
ADD/DEL (Toggle) 7-8
Admin Status (Toggle) 7-7
FID - lower part of screen (Modifiable) 7-7
FID - upper part of screen (Read-Only) 7-7
VLAN ID - lower part of screen
(Modifiable) 7-7