INSTALLATION
Combin ation Blan ket/Flui d W armer ▪ Operat or’ s Manua l ▪ MN -399 40 ▪ Rev 3 ▪ 8/20
25
Continued from previous page
5. Install the toe panel.
Connect power To connect electric power to the warmer, do the following.
6. Connect the plug to the electrical outlet.
Result The warmer is now installed and ready to be used.
NOTE: For built-in units, contact a licensed contractor or
electrician for connection to facility power.
To Next Page
Loading...
