How to resolve a fan sensor failure on Enthermics EC1850BL?
If you encounter a Fan or Fan Sensor Failure in your Enthermics Medical Equipment (fluid warmers only), check to ensure the fan sensor wires are connected to both the fan and the control board. If the error continues after checking the wires, replace the fan.
What to do if debris is not causing a short between the test pins in Enthermics EC1850BL Medical Equipment?
If debris is not causing a short between the test pins on your Enthermics Medical Equipment, replace the control.
Essential precautions for electrical safety, proper usage, and operator training to prevent hazards.
Detailed technical specifications including model, weight, cavity capacity, temperature range, clearance, and electrical standards.
Step-by-step guide for safely unpacking the warmer, including necessary checks and tools.
Covers requirements, voltages, positioning, mounting, and power connection for installation.
Guides for operating the Blanket Warmer (Bottom Cavity) and TriMode Warmer (Top Cavity), including temperature settings and loading.
Procedures for resetting the warmer after a power interruption and acknowledging alarm indicator lights.
A comprehensive list of error codes, their causes, and required actions for troubleshooting warmer malfunctions.
General| Category | Medical Equipment |
|---|---|
| Model | EC1850BL |
| Manufacturer | Enthermics |
| Power | 120V, 60Hz |
| Display | Digital |
To Next Page
