Entrust nShield Connect - Page 24

Ê 2‑3 HSM feature enable
Ê 2‑3‑1 Read FEM from card
Ê 2‑3‑2 Read from a file
Ê 2‑3‑3 View current state
Ê 2‑3‑4 Write state to file
Ê 2‑4 Set HSM mode
Ê 2‑4‑1 Operational
Ê 2‑4‑2 Initialization
3 Security World mgmt
Ê 3‑1 Display World info
Ê 3‑2 Module initialization
Ê 3‑2‑1 New Security World
Ê 3‑2‑2 Load Security World
Ê 3‑2‑3 Erase Security World
Ê 3‑3 RFS operations
Ê 3‑3‑1 Update World files
Ê 3‑3‑2 Remove RFS lock
Ê 3‑4 Admin operations
Ê 3‑4‑1 Replace ACS
Ê 3‑4‑2 Recover keys
Ê 3‑4‑3 Recover PIN
Ê 3‑4‑4 Set secure RTC
Ê 3‑5 Cardset operations
Ê 3‑5‑1 Create OCS
Ê 3‑5‑2 List cardsets
Ê 3‑6 Card operations
Ê 3‑6‑1 Card details
Ê 3‑6‑2 Check PIN
Ê 3‑6‑3 Change PIN
Ê 3‑6‑4 Erase card
Ê 3‑7 Keys
Ê 3‑7‑1 List keys
Ê 3‑7‑2 Verify key ACLs
Ê 3‑8 Set up remote slots *
Ê 3-9 Set up dynamic slots
Ê 3-9-1 Dynamic Slots
Ê 3-9-2 Slot mapping
4 payShield *
5 CodeSafe *
nShield® Connect Installation Guide 24 of 73