Division:
18 I 77
System description
Figure 2 - ST1-1200 safety weighing enclosure on stainless steel table frame
Functional description
The ST1 series safety weighing enclosures protect the user from airborne hazardous
substances during the weighing process or other dusty manipulations. This protection is
ensured by:
Alarm-supported monitoring of air flows;
Low-turbulence air flow due to the ergonomic design;
Work according to GLP regulations.
The aim is to virtually eliminate the user's exposure to hazards. The design of the ST1 series
safety weighing enclosures guarantees highly effective extraction as the hazardous
substances remain within the detection area. The leakage of hazardous substances into the
ambient air of the ST1 safety weighing enclosure is virtually eliminated.
To Next Page
Loading...