Division:
8 I 77
Please observe the following general safety instructions:
The information in these instructions will help you to work in a safe and
contamination-free manner.
Please read these instructions with particular care before working in the safety
weighing enclosure for the first time.
Keep the instructions handy. When working on the ST1 weighing enclosure, ensure
that the instructions are also available there. a1-envirosciences recommends creating
an SOP for working on the ST1 weighing enclosure.
These instructions assume that the user is familiar with all relevant directives, the
regulations "Safe working in laboratories" and working on technical equipment.
The ST1 weighing enclosure may only be operated by trained personnel with the
necessary basic technical knowledge.
Personnel must be properly instructed and trained before working with hazardous
substances.
The applicable safety regulations of your company have priority and must be complied
with at all costs.
Work according to the work regulations given in the operating instructions. For your
own safety and for the protection of other employees, you must observe the
additional safety instructions given in these instructions in addition to the safety
regulations applicable to you.
For any questions regarding the use of the ST1 safety weighing enclosure, always
contact the person responsible for it or a1-envirosciences.
Safety instructions for installation, operation, modification and malfunctions
There is an immediate danger to life in case of contact with live parts. If the
insulation is damaged, switch off the power supply immediately and arrange
for repair. Work on the electrical equipment should only be carried out by
trained, authorised personnel. Keep moisture away from live parts. This could
lead to a short circuit.
ger to life due to electric current
To Next Page
Loading...