Division:
24 I 77
Electrostatic discharge systems (options)
Electrostatic discharge systems are used to discharge electrostatic charges that adhere to
surfaces of laboratory equipment, gloves and powders. These devices consist of discharge
electrodes and high-voltage power supply units.
Figure 7 - Antistatic bar Figure 8 - Point electrode
Double bag waste system (option)
The double bag waste system is used for contamination-free disposal of waste and
materials.
Printer table (option)
An additional storage surface, e.g. for a scale printer, can optionally be attached to the ST1
safety weighing enclosure. It can be attached to either the left or right side wall of the safety
weighing enclosure. The printer table can be combined with the safetech waste bag system
on both sides.
To Next Page
Loading...