Division:
11 I 77
Instructions for safe maintenance, servicing, troubleshooting
Observe general occupational safety rules and accident prevention regulations.
Wear suitable personal protective equipment.
Carry out prescribed maintenance and inspection work in due time or have it
carried out by our qualified and specially trained personnel.
Before maintenance, servicing and repair work, the power supply must be switched
off and secured against being switched on again.
Check loosened screw connections for tightness.
After completion of the maintenance work, safety devices must be checked for their
function.
Main features
Figure 1 - ST1-1200 safety weighing enclosure
To Next Page
Loading...