Division:
10 I 77
If mains switches are not accessible, the equipment cannot be switched off
quickly and safely when needed. Damage to the equipment is possible, or
other hazards may arise.
Make sure that the mains switches are always freely accessible.
Highly variable or excessive ambient temperatures can cause condensation of
water in the filter unit or overheating.
Operate the ST1 safety weighing enclosure at as constant an ambient
temperature as possible in the range of 5 to 40°C to avoid damage from
condensing water or overheating.
Improper maintenance, repair or modification work can lead to considerable
damage.
Cleaning, assembly, disassembly, maintenance, adjustment and repair may
only be carried out by persons who are trained for these activities and who
know the possible dangers.
Unauthorised modifications and alterations to the ST1 safety weighing
enclosure are not permitted for safety reasons.
Only original parts and accessories specifically designed for the ST1 safety
weighing enclosure may be used. Any liability for damage caused by the use
of non-original parts or accessories is excluded.
Leave mains switch accessible
Damage due to condensation or overheating
To Next Page
Loading...