Division:
28 I 77
Instructions for working with ST1 safety weighing enclosures
a) Work must only be carried out with the system running
Work on the ST1 safety weighing enclosure must only be carried out when the filter
housing ventilation is active. After approx. 3 minutes, a safe working condition is
achieved and it is possible to work with hazardous substances. Please also ensure
sufficient acclimatisation time for the scale.
b) Alarm
If the visual or audible alarm is triggered continuously, the safety of the ST1 safety
weighing enclosure is no longer guaranteed and the user must withdraw in a
controlled manner.
c) Contamination
Equipment and objects that have been brought into the ST1 safety weighing
enclosure and operated or used there are to be considered contaminated and
handled accordingly.
d) Work regulations
The company's internal directives and regulations have priority in any case.
To Next Page
Loading...