Division:
9 I 77
Basically, the discharge electrodes are safe to touch. This means that touching the metal
tips of the discharge electrodes will not cause electric shock.
Substances as well as auxiliary and operating materials could cause damage
to health or the environment in the event of contact.
Before starting any work with the equipment, observe the relevant work
instructions of the operator.
Observe the safety data sheets of the substances used.
Remember that the transfer of hazardous substances from the storage
location to the equipment and the disposal of contaminated waste also
involve risks.
Wear required protective equipment (PPE = personal protective equipment).
Solvents can form explosive vapour/air mixtures. Dusts can form explosive
dust/air mixtures. An explosive atmosphere in conjunction with an ignition
source can lead to an explosion.
Solvents are highly flammable. Storage of flammable solvents in the
equipment is therefore not permitted.
Explosions or fires can lead to serious or fatal injuries.
The equipment must not be used when the filter unit is switched off.
Flammable liquid or gaseous substances must not be introduced into the
work area, except for the approved cleaning agents and solvents.
Ignition sources must not be present in or brought into the work area during
cleaning.
Dust formation in explosive concentrations in the work area must be
avoided.
Warning of contamination risks
Warning of explosion and fire hazards
To Next Page
Loading...