Division:
44 I 77
Safe disposal of waste
All materials used in the ST1 safety weighing enclosure are to be considered
contaminated.
Hands may only be pulled out of the work opening of the ST1 safety
weighing enclosure after they have been thoroughly cleaned and
decontaminated.
Materials that cannot be cleaned can either be disposed of via the waste
system or must be bagged contamination-free and thus isolated before
removal.
Please dispose of waste and materials that cannot be cleaned via the double bag waste
system on the right or left side of the enclosure.
The materials are transferred to the inner waste bag through the side opening. Make sure to
push the materials as deep as possible into the waste bag. This makes it easier to change
the waste bag.
Improper discharge of waste bags can lead to contamination.
Always wear two pairs of gloves and arm sleeves to discharge the waste
bags.
Follow the instructions carefully.
Warning of contamination risks
Warning of contamination risks
To Next Page
Loading...