Enviro ST1 - Page 47

Division:
47 I 77
6
Remove the gloves and
place them near the
waste bag inside the
ST1 weighing
enclosure.
7
Pull off the outer black
rubber band.
8
Squeeze the outer
waste bag tightly with
one hand and pull it off.
Close the top of the
waste bag with your
free hand, fold it over
and seal it tightly with
tape.
9
Reach into the inner
bag, grab the
contaminated glove and
pull it outwards with the
waste bag.
10
Pull the black rubber
ring over a waste bag.
11
Pull this bag over the
inner bag and secure it
to the ST1 weighing
enclosure using the
black rubber ring.