Division:
53 I 77
Always switch off the high-voltage power supply unit before cleaning the
discharge electrodes!
Do not damage the discharge tips during cleaning.
Cleaning with moistened cloths is not
recommended as on the one hand there is a risk of
injury, and on the other hand fibre residues of the
cloths get stuck on the electrode tips.
Brushes with polyamide bristles, such as
toothbrushes, are well suited for cleaning. For
better cleaning, the brushes can be moistened.
Water and solutions with ethanol, isopropanol or methanol are well suited for
this purpose.
To Next Page
Loading...