Envirosight Verisight Pro
+
Warnings, Safety Measures and Care
Please read the safety measures closely and observe them. They preserve your
own safety, the safety of co-workers as well as the prevention of damage to the
Verisight Pro+ inspection system and its components.
CAUTION!
The operator of the Verisight Pro+ inspection system must be
trained by either Envirosight or one of its authorised representatives before
using the system.
CAUTION!
Despite all of the safety functions built into the system, the
operator is not exonerated in any way from his/her duty of care.
Thus the user alone is responsible for any damage caused as a
result of misuse.
CAUTION!
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment may be
impaired.
DANGER!
Risk of deadly injuries from electrical current!
The mains plug and or IEC connector of the PSU is the supply
isolation device and must be easily accessible.
• There are no user serviceable components within any module in
the system.
DANGER!
Risk of deadly injuries from electrical current!
Only use an appropriately rated and approved cord set in
accordance with the regulation of the country in which this system
is used.
16
To Next Page
Loading...