EOS Cubo / Cubo Avantgarde - Installation and Operating Instructions EN-47
Maintenance
The safety temperature
limiter was triggered
and the heater no lon-
ger heats.
The safety temperature
limiter was triggered by
heat accumulation.
Check the inlets, outlets,
and the fan and ensure that
the heater has access to a
sufficient amount of air.
Reset the safety tempera-
ture limiter. See
Resetting the safety tem-
perature limiter, EN-45
The position of the tem-
perature sensor in the
cabin is not optimal.
Check the position of the
temperature sensor and
adjust as needed. See
3.1.2 Temperature sensor,
EN-24.
Error Reason Solution
To Next Page
Loading...
