To Next Page

To Previous Page

EOS Cubo / Cubo Avantgarde - Installation and Operating Instructions EN-49

General terms and conditions of service

IV. Service visit by the manufacturer

Services rendered on site by an employee of the manufacturer must be

agreed in advance.

If the main reason for the service visit is not the fault of the manufacturer,

any costs incurred shall be charged to the customer after the service visit

and must be paid by the customer in full within the agreed payment term.

V. Liability

The manufacturer shall assume liability in accordance with the currently

applicable statutory regulations. All our products are packaged in such a

way that the individually packed goods (pallets) can be shipped.

We wish to point out that our packaging is not suitable for individual ship-

ments via postal service. The manufacturer shall accept no liability for dam-

ages incurred as a result of improper packaging in an individual shipment.

VI. Manufacturer’s warranty

The manufacturer’s warranty shall apply only if installation, operation and

maintenance have been carried out in full accordance with the manufac-

turer’s specifications in the installation and operating instructions.

 The warranty period shall commence from the date on which proof of

purchase is provided and shall be limited, in all cases, to 24 months.

 Warranty services shall be performed only if proof of purchase of the

equipment can be presented.

 Any and all warranty claims shall become void if modifications are made

to the equipment without the manufacturer’s express consent.

 Any warranty claim shall likewise become void in the case of defects

that arise due to repairs or interventions made by unauthorized persons

or due to improper use.

 In the case of warranty claims, the serial and article numbers must be

provided, together with the unit designation and a meaningful descrip-

tion of the error.

EOS Cubo User Manual

Other manuals for EOS Cubo