Epever Tracer AN series User Manual

25
Step 2: Download software
www.epever.com——(Charge Controller (Lithium)—Android)
The controller can only set the lead-acid battery type. The lithium battery type
needs to be set through the PC software or APP.
④ Battery voltage control parameters
 Lead-acid battery parameters
The parameters are measured in the condition of 12V/25 ºC. Please double the values in
the 24V system and quadruple the values in the 48V system.
Voltage control
parameters
Sealed
GEL
FLD
User
Over voltage
disconnect voltage
16.0V
16.0V
16.0V
9~17V
Charging limit voltage
15.0V
15.0V
15.0V
9~17V
Over voltage reconnect
voltage
15.0V
15.0V
15.0V
9~17V
Equalize charging
voltage
14.6V
--
14.8V
9~17V
Boost charging voltage
14.4V
14.2V
14.6V
9~17V
Float charging voltage
13.8V
13.8V
13.8V
9~17V
Boost reconnect
charging voltage
13.2V
13.2V
13.2V
9~17V
Low voltage reconnect
voltage
12.6V
12.6V
12.6V
9~17V
Under voltage warning
reconnect voltage
12.2V
12.2V
12.2V
9~17V

Epever Tracer AN series Specifications

General

Brand	Epever
Model	Tracer AN series
Category	Controller
Language	English