Epever Tracer AN series - LCD Display Information

21
3 Operation
3.1 Indicator
Indicator
Color
Status
Instruction
Green
ON solid
PV connection is normal, but the
voltage is low and not charging.
Green
OFF
No PV voltage(night time) or PV
connection fault
Green
Slowly flashing
PV is charging
Green
Fast flashing
PV over voltage
Note: The fault indicator refers to chapter 3.3, "LCD Display."
3.2 Buttons
Modes
Note
(Load) dry
contact
In manual mode, short press the "ENTER" button to turn on/off the
(Load) dry contact.
Clear fault
Press the "ENTER" button
Browsing mode
Short press the "SELECT" button
Setting mode
Long-press the "ENTER" button to enter the Setting mode, and
short press the "SELECT" button to modify the parameter. Then
short press the "ENTER" button to confirm or exit the current
interface automatically after more than 10S.