Epever Tracer AN series User Manual

7
1.4 Included accessories
No.
Included
accessories
Model
Number
Picture
1
Local temperature
sensor
RT-MF58R47K3.81A(2P-3.81mm)
1 pcs
2
Battery voltage
sensor terminal
2P-3.81mm
1 pcs
3
(Load) dry contact
terminal
2P-3.81mm
1 pcs
4
(Utility/Generator) dry
contact terminal
2P-3.5mm
2 pcs
The above-included accessories are installed on the related port. Please open the
controller case before checking.
Do not insert the same model terminals into different interfaces. Otherwise, the
controller will be damaged.
1.5 Optional accessories
No.
Optional accessories
Picture
Instruction
1
Remote temperature
sensor
RTS300R47K3.81A
Acquisition of battery temperature for
undertaking temperature
compensation of charging and
discharging parameters, the standard
length of the cable is 3m (length can
be customized). RTS300R47K3 is
connected to the controller by port ❽.
NOTE: If the remote temperature sensor is not
connected to the controller or damaged, the
controller will charge or discharge the battery
at the default 25 ℃ (no temperature
compensation).
2
USB to RS485
converter
CC-USB-RS485-150U
USB to RS485 converter is a special
cable for connecting the controller's
RJ45 port to the PC's USB port. The

Epever Tracer AN series Specifications

General

Brand	Epever
Model	Tracer AN series
Category	Controller
Language	English