Using the Printer Software with Macintosh 125
EPSON AcuLaser C3800 User's Guide
3. Click Add PICT on the Custom watermark dialog box.
4. Select the PICT file, then click Open.
5. Type the file name in the Name box, then click Save.
Note:
To remove the saved watermark, select it from the List box, then click Delete. After removing it,
be sure to click Save to close the dialog box.
6. Select the saved custom watermark from the Watermark drop-down list on the Layout
dialog box, then click OK.
To Next Page
Loading...
