Using the Control Panel 165
EPSON AcuLaser C3800 User's Guide
Chapter 8
Using the Control Panel
Using the Control Panel Menus
You can use the printer’s control panel to access a variety of menus that allow you to check
the status of consumable products, print status sheets, and make printer settings. This
section describes how to use the control panel menus, and when it is appropriate to make
printer settings using the control panel.
When to make control panel settings
In general, printer settings can be made from the printer driver, and do not need to be made
using the control panel. In fact, printer driver settings override settings made using the
control panel, so use the control panel menus only to make settings you cannot make in
your software or printer driver, including the following:
❏ Changing the emulation modes and selecting the IES (Intelligent Emulation Switching)
mode
❏ Specifying a channel and configuring the interface
❏ Choosing the size of the memory buffer used to receive data
How to access the control panel menus
For a complete description of the items and settings available in the control panel menus,
see "Control Panel Menus" on page 166.
1. Press the Enter button to access the control panel menus.
To Next Page
Loading...
Need help?
General