Using the Control Panel 192
EPSON AcuLaser C3800 User's Guide
Status and Error Messages
This section contains a list of error messages shown on the LCD panel, a brief description
of each message and suggestions for correcting the problem. Note that not every message
shown on the LCD panel indicates a problem. When the mark is displayed at the right of
the warning message, multiple warnings occur. To confirm all warnings that occur, press
the d Down button to display the Status Menu, then press the Enter button. The LCD
panel also displays the amounts of remaining toners and available paper sizes.
Calibrating Printer
The printer automatically calibrates itself. This is not an error message, and will clear itself
after the calibration process has finished. While the printer displays this message, do not
open the covers or turn off the printer.
Cancel All Print Job
The printer is canceling all print jobs in the printer memory, including jobs the printer is
currently receiving or printing. This message appears when the + Cancel Job button has
been pressed down for more than 2 seconds.
Cancel Print Job
The printer is canceling the current print job. This message appears when the + Cancel
Job button has been pressed and released within 2 seconds.
Cancel Print Job (by host)
The print job is canceled at the printer driver.
Can’t Print
The print data is deleted because it is incorrect.
Make sure the appropriate paper size and printer driver are used.
While printing the data in the USB memory, make sure that the USB memory is inserted
correctly.
While printing in the black and white mode when one or more of the imaging cartridges has
reached the end of its service life, check if Black is selected in the printer driver.
PS and PDF files cannot be printed in the black and white mode, replace any color imaging
cartridges that have reached the end of its service life.
To Next Page
Loading...
Need help?
General