Using the Printer Software with Macintosh 128
EPSON AcuLaser C3800 User's Guide
Note:
If you select Collate Number from the drop-down list, the number of copies is printed.
4. Click OK to apply the settings and return to the Layout dialog box.
Duplex printing
Duplex printing prints on both sides of the paper. You can also do duplex printing manually
without using the Duplex Unit. When printing for binding, the binding edge can be specified
as required to produce the desired page order.
Printing with the Duplex Unit (models with Duplex Unit only)
Follow the steps below to print with the Duplex Unit.
For Mac OS X users
1. Open the Print dialog box.
2. Select Printer Settings from the drop-down list, and select Basic Settings tab.
3. Click Duplex check box, select a Binding position from Left, Top, or Right.
4. Click the Duplex Settings button.
5. Specify the Binding Margin for the front and back sides of the paper.
6. Select whether the front or back side of the paper is to be printed as the Start Page.
7. Click Print to start printing.
To Next Page
Loading...
Need help?
General