Using the Control Panel 177
EPSON AcuLaser C3800 User's Guide
Manual Feed
Allows you to select the manual feed mode for the MP tray.
Copies
Designates the number of copies to be printed, from 1 through 999.
Duplex
Turns duplex printing on or off. This allows you to print on both sides of a page.
Binding
Specifies the binding direction of the printout.
Start Page
Specifies whether printing starts from the front or back of the page.
Paper Type
Specifies the type of paper to be used for printing. The printer adjusts the printing speed
according to this setting. The printing speed is reduced when Thick, Extra Thk, or
Trnsprnc is selected.
Page Side
Select Front when printing on the front of plain paper (Plain), semi-thick paper
(Semi-Thick), or thick paper (Thick).
Select Back when printing on the back of plain paper (Plain (Back)), semi-thick paper
(Semi-Thick (Back)), or thick paper (Thick (Back)).
Skip Blank Page
Enables you to skip blank pages when printing. This setting is available when you print in
the ESC/Page, ESCP2, FX, or I239X mode.
Auto Eject Page
Specifies whether or not to eject paper when the limit specified in the Time Out setting is
reached. The default is Off, which means paper is not ejected when the time-out limit is
reached.
To Next Page
Loading...
Need help?
General