Installing Options 218
EPSON AcuLaser C3800 User's Guide
8. Pull down the transfer unit.
9. Close the front cover.
10.Turn on the printer.
To confirm that the option is installed correctly, print a Status Sheet. See "Printing a Status
Sheet" on page 259.
Note:
The printer cannot recognize the Duplex Unit if it's cover has not been removed. Make sure that the
cover was removed as explained in step 3.
Note for Windows users:
If EPSON Status Monitor is not installed, you have to make settings manually in the printer driver.
See "Making Optional Settings" on page 71.
Note for Macintosh users:
When you have attached or removed printer options, you need to delete the printer using Print
Setup Utility (for Mac OS X 10.3 and 10.4), Print Center (for Mac OS X 10.2 or below), or
Chooser (for Mac OS 9), and then re-register the printer. For Windows, see "Printing with the
Duplex Unit (models with Duplex Unit only)" on page 51, For Macintosh, see "Printing with the
Duplex Unit (models with Duplex Unit only)" on page 128 for information about duplex printing.
To Next Page
Loading...
Need help?
General