Replacing Consumable Products 235
EPSON AcuLaser C3800 User's Guide
4. Open the paper guide on the top front of the printer.
5. Unlock the lock levers on both sides of the fuser unit.
6. Pull the fuser unit towards you and then lift it out of the printer.
w
Warning:
Be careful not to touch the fuser, which is marked CAUTION HIGH TEMPERATURE, or
the surrounding areas. If the printer has been in use, the fuser and the surrounding areas
may be very hot. If you must touch one of these areas, wait 30 minutes to allow the heat
to subside before doing so.
To Next Page
Loading...
Need help?
General