Using the Printer Software with Windows 54
EPSON AcuLaser C3800 User's Guide
6. When printing for binding as a booklet, select the Binding Method check box and
make appropriate settings. For details about each setting, see online help.
7. Click OK.
8. Execute the print job.
Note:
The alert screen appears on the computer. Click the OK button on the screen.
9. After printing on one side, reload the paper into the MP tray with the printed surface
face-up as shown below. Then, press the N Start/Stop button.
Note:
❏ Manual duplex printing may not be completed normally when printing a document for which the
paper size, orientation, or paper source setting is set to change in the document.
❏ When doing duplex printing manually with collate set on the printer driver, the printing may not
be completed normally depending on the application you use.
❏ Straighten the paper before loading it. If curled paper is loaded, it may not feed correctly.
To Next Page
Loading...
