Epson dreamio EMP-TWD1 User Manual

14
Press to open the disc tray.
A beep sounds and the power comes on.
The same operation can be performed using
on the remote control.
Place the disc in the disc tray with the
label facing upwards.
When using 8 cm discs, place the disc in the
hollow in the center of the disc tray.
Press to close the disc tray.
Depending on the disc inserted, operation is as
follows.
Excluding : The projection lamp lights
automatically, and projection begins.It takes a few
seconds from when the lamp lights up until the
projected image is brightly projected.
: Press to commence audio
playback.The projection lamp does not light.
The same operation can be performed using
on the remote control.
Disc Playback
When a menu is displayed
s page 21
s page 22
s page 23
QTip
When using in high altitude areas of above 1500 m,
set the “High Altitude Mode” to “ON”.
s page 51
Playing a disc and projecting
The display window during
playback
When playing
When playing
When playing
When playing
When playing
Display window
Chapter number
Elapsed playback
time
Track number
Track number
Elapsed playback
time
Track number
Elapsed playback
time
File number
Group number
v
1
v
2
v
3

Epson dreamio EMP-TWD1 Specifications

General

Brand	Epson
Model	dreamio EMP-TWD1
Category	Projector
Language	English