30
You can set titles, chapters, and tracks to playback in the order of your
preference.
1
Press when stopped.
Each time you press , the display window on the main unit changes
as follows. Press repeatedly until "PRGM" is displayed.
2
Set the order according to the following screen explanations.
s "When using the numeric buttons" page 21
3
Press .
• Playback begins according to the order you set.
• Once the set playback is fully complete, playback ceases and
"Program" is displayed.
Canceling set items on the program screen individually
Set numbers are deleted one by one each time is pressed.
Canceling all set items on the program screen
Press .
Also cancelled when the power to this unit is switched off.
Resuming normal playback
When stopped, press repeatedly until the display window of the main unit
returns to its normal display state.
In this case, the contents entered in the program screen remain in memory. Program
play can be executed by pressing again and selecting "PRGM".
QTip:
• A maximum of 99 titles, chapters or tracks can be selected. If you try to
enter more than 99, "FULL" is displayed.
• If the total of the set playback time
exceeds 9 hours, 59 minutes and 59 seconds, "--:--" is displayed in the
display window of the main unit, however, you can continue to perform
the set order as it is.
• If you press , instead of setting the chapter or track
number, "ALL" is displayed and all of the chapters and tracks contained
in that title/group are set.
• If stopped during program play mode, resume play cannot be used.
• Depending on the type of disc, you may not be able to use program play.
Playing in the order of your choice (program play)
Set to the [Function] position before
performing operations
Program play
Random play s page 31
Normal playback
Normal
display
To Next Page
Loading...
Need help?
General