40
You can connect to AV amplifiers and equipment capable of making digital recordings (MD recorders, and so-on) when
they are equipped with a digital audio input port. When connecting, use a commercially available optical digital audio
cable.
You can enjoy richer more powerful bass, by connecting to the optional subwoofer.
For connection and usage instructions, refer to the "User’s Guide" provided with your subwoofer.
QTip:
• The signal being output from the Optical Audio-Out port is changed with the "DIGITAL AUDIO OUTPUT" setting in
the settings menu. For detailed output signal information s page 46
• The settings menu "D. RANGE COMPRESSION" setting is invalid when connecting to an amplifier with a built-in
Dolby Digital decoder. s page 45
Connecting to audio equipment with an optical digital input
When connecting the cable, remove the cap, align the shape, and insert firmly.
Apply the cap when not in use to prevent dust from entering the port.
MD recorder
AV amplifier
To optical digital
input port
Optical digital cable
(commercially available)
To Optical Audio-Out port
Connecting a subwoofer
To Subwoofer output port
RCA cable
(comes with the subwoofer)
Powered Subwoofer
(optional)
To Next Page
Loading...
Need help?
General