53
Appendix
When the or indicators flash orange Warning
: lit : flashing : off
High-speed cooling in
progress
You can continue projecting in
this state. Projection stops
automatically if subsequent
high temperatures are
registered.
Check the 2 items listed to the
right.
• Move this unit away from the
wall by at least 20 cm.
• Clean the air filter.
s page 56
If there is no improvement
when you press and
switch the power on,
discontinue use and
disconnect the power cable
from the electrical outlet.
Contact your dealer.
s page 65
Lamp replacement notification
It is time to replace the lamp. Replace the lamp with a new one as soon as possible.
If you continue use when in this state, it is possible that the lamp may explode.
s page 58
When the or indicators are off Normal
: lit : flashing : off
Standing-by
Shows that this unit is ready to be used.
Warming up
(approx. 20 seconds)
In warm-up mode pressing or has no effect.
Do not turn off the power or unplug the unit during warm-up, as this
may reduce the lifespan of the lamp.
Projection in
Progress
Cooling down
(approx. 9 seconds)
The operation of all remote control and main unit buttons is suspended
during cool-down.
Enters stand-by mode once cool-down has completed.
Do not turn off the power or unplug the unit during cool-down, as this
may reduce the lifespan of the lamp.
Break
Press to return to normal playback.
Orange
Green
Orange
Green
OrangeOrange
Green GreenGreen
Green GreenGreen
Green Orange
Green GreenGreen
To Next Page
Loading...
Need help?
General