6
• Make sure the lens cover is securely in place.
• Remove the disc and close the disc tray.
• Move the projector, holding it as shown in the
following illustration.
Be careful not to damage the mesh covering the
speaker with your hands.
• Many glass and precision parts are used within this
unit.In order to prevent impact during transportation,
re-use the box and protective packaging you received
at the time of purchase.
If you no longer have the original packing, protect
the outside of this unit with shock absorbing material
to protect it from impact, place it inside a strong box
and make sure it is clearly labeled for the
transportation of precision equipment.
• Take off the lense cap and wrap it.
• If using a courier service for transportation, inform
them that this unit contains precision equipment and
should be handled accordingly.
* Your warranty does not cover any damages that may
occur to this product during transportation.
• This unit is equipped with Macrovision copy
protection.The intellectual property rights to the
patent of this copy protection technology are owned
by the Macrovision company of America, and others.
When employing this technology, a license is
required from the Macrovision company.The
Macrovision company does not authorise the use of
this technology except for a limited range of intended
purposes, including home use.Further, remodeling,
disassembly, and reverse engineering are prohibited.
• Reproduction of a disc for the purposes of broadcast,
projection in public, public musical performance, or
rental (regardless of compensation, remuneration, or
lack thereof) without the permission of the copyright
owner, is strictly prohibited.
When moving this unit
Transportation cautions
Copyright
To Next Page
Loading...
Need help?
General