Note:
❏ Make sure you raise and slide the stopper so that it is a little bit longer than the length of the original. is allows the
ejected originals to be stacked comfortably on the output tray.
❏
e
stopper can move forward and backward on the central output extension so that you can easily adjust the stopper
position to the best position for the originals being scanned.
Originals longer than A4 (297 mm) to Legal (355.6 mm)
Open and extend the input tray, slide out the output tray extension of the Flatbed Scanner Dock, and then raise the
stopper.
Using the Flatbed Scanner Dock
>
About the Flatbed Scanner Dock
>
Notes on Using the Flatbed Scanne
…
141
To Next Page
Loading...
