❏ If the ejected originals get stuck in the output tray, store the output tray and do not use it.
Related Information
& “Cleaning Inside the Scanner” on page 148
Paper Protection Does not Work Correctly
Depending on the original and the level you set, this feature may not work correctly.
❏ Select O to disable the feature when scanning plastic cards or thick paper.
❏ When misdetection occurs frequently, lower the level of this feature.
❏ If your original is damaged, check that this feature is enabled. If it is already enabled, increase the level of
protection for the feature.
Related Information
& “Setting the Document Protection Feature” on page 132
The Originals Get Dirty
Clean the inside of the scanner.
Related Information
& “Cleaning Inside the Scanner” on page 148
Scanning Speed Slows Down when Scanning Continuously
When scanning continuously using the ADF, scanning slows down to prevent the scanner mechanism from
overheating and being damaged. However, you can continue scanning.
To regain normal scanning speed, leave the scanner idle for at least 30 minutes. Scanning speed does not recover
even if the power is o.
Scanning Takes a Long Time
❏ e scanning speed may slow down depending on the scanning conditions, such as high resolution, image
adjustment features,
le
format, and so on.
❏ Computers with USB 3.0 (SuperSpeed) or USB 2.0 (Hi-Speed) ports can scan faster than those with USB 1.1
ports. If you are using a USB 3.0 or USB 2.0 port with the scanner, make sure it meets the system requirements.
❏ When using security soware, exclude the TWAIN.log le from monitoring, or set the TWAIN.log as a read-
only le. For more information on your security soware’s functions, see the help and so on supplied with the
soware. e TWAIN.log le is saved in the following locations.
C:\Users\(user name)\AppData\Local\Temp
Solving Problems
>
Paper Feeding Problems
>
Scanning Takes a Long Time
168
To Next Page
Loading...
Need help?
General
