Name Function
A
[t] button
Turns the projector power on or off.
s "From Installation to Projection" p.28
B
[Computer] button
Each time you press the button, the input changes between
images from the Computer1 port and the Computer2
port.
C
[Video] button
Each time the button is pressed, the image cycles through
Video, S-Video, and HDMI ports.
D
[Freeze] button
Pauses or resumes image playback.
s "Freezing the Image (Freeze)" p.44
E
[A/V Mute] button
Turns the video and audio on or off.
s "Hiding the Image and Sound Temporarily (A/V
Mute)" p.44
Name Function
F
[Page] buttons
[Up] [Down]
Changes pages in files such as PowerPoint files when using
the following projection methods.
• When using the Wireless Mouse function
s "Using the Remote Control to Operate the
Mouse Pointer (Wireless Mouse)" p.47
• When using USB Display
s "Projecting with USB Display" p.30
• When connecting to a network
When projecting images using Slideshow, pressing these
buttons displays the previous/next image file.
G
[Source Search]
button
Switches to the image from the input port where video
signals are being input.
s "Automatically Detect Input Signals and Change the
Projected Image (Source Search)" p.29
H
[LAN] button
Changes to the images projected with EasyMP Network
Projection. When projecting using the optional Quick
Wireless Connection USB Key, this button switches to
that image.
s "Switching to the Target Image Using the Remote
Control" p.30
I
[USB] button
Each time the button is pressed, it cycles through the
following images:
• USB Display
• Images from the device connected to the USB(TypeA)
port
s "Switching to the Target Image Using the Remote
Control" p.30
J
[Volume] buttons
[a][b]
[a] Decreases the volume.
[b] Increases the volume.
s
"Adjusting the Volume" p.38
Monitoring and Controlling
110
To Next Page
Loading...
