a
You can set H/V-Keystone from the Configuration menu.
s Settings - Keystone - H/V-Keystone p.63
Quick Corner
This allows you to manually correct each of the four corners of the
projected image separately.
a
Press the [Menu] button while projecting.
s "Using the Configuration Menu" p.57
Using Remote Control Using the Control Panel
b
Select Keystone from Settings.
c
Select Quick Corner, and then press the [ ] button.
d
Using the [ ], [ ], [ ], and [ ] buttons on the remote
control, or the [
], [ ], [Wide], and [Tele] buttons on the
control panel, select the corner to correct, and then press the [
]
button.
Adjusting Projected Images
35