Top Menu Name Submenu Name Items or Setting Values
Trap IP Address 1 and
Trap IP Address 2
-
Priority Gateway Wired LAN and Wireless LAN
AMX Device Discovery On and Off
Crestron RoomView On and Off
Bonjour On and Off
Image Menu
Settable items vary depending on the image signal and source currently
being projected. Setting details are saved for each image signal.
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.29
Sub-menu Function
Color Mode
You can select the quality of the image to suit your surroundings.
s "Selecting the Projection Quality (Selecting Color Mode)"
p.38
Brightness
You can adjust the image brightness.
Contrast
You can adjust the difference between light and dark in the
images.
Color Saturation
You can adjust the color saturation for the images.
Tint
You can adjust the image tint.
Sharpness
You can adjust the image sharpness.
Abs. Color Temp.
(This item cannot be selected if Color Mode is set to
sRGB
g
.)
You can adjust the overall tint of the image.You can adjust tints in
10 stages from 5000 K to 10000 K. The image is tinted blue when a
high value is selected and tinted red when a low value is selected.
List of Functions
60
To Next Page
Loading...
Need help?
General
