s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.29
Sub-menu Function
Lamp Hours
You can display the cumulative lamp operating time
*
.
When it reaches the lamp warning time, the characters are
displayed in yellow.
Source
You can display the source name for the connected
equipment currently being projected.
Input Signal
You can display the content of Input Signal set in the
Signal menu according to the source.
Resolution
You can display the resolution.
Video Signal
You can display the settings for Video Signal in the Signal
menu.
Refresh Rate
You can display the
refresh rate
g
.
Sync Info
You can display the image signal Information.
It may be needed if service is required.
Sub-menu Function
Status
This information is about errors that have occurred with
the projector.
It may be needed if service is required.
Serial Number
Displays the projector's serial number.
Event ID
Displays the application error log.
s "About Event ID" p.92
* The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours
and above is displayed as "10H", "11H", and so on.
Reset Menu
Sub-menu Function
Reset All
You can reset all items in the Configuration menu to their default
settings.
The following items are not reset to their defaults: Input Signal,
Zoom, User's Logo, all items for Network menus, Lamp Hours,
Language, and Password.
List of Functions
75
To Next Page
Loading...
Need help?
General
