Using the Quick Wireless Connection USB Key
Connect the optional Quick Wireless Connection USB Key to the wireless
LAN unit installation section. Check the following points when connecting
a computer to the projector using wireless LAN.
• The wireless LAN unit (ELPAP07) is connected to the projector.
• The projector is setup to connect to the network using wireless LAN.
s "Wireless LAN menu" p.84
a
Turn on the projector, and then press the [LAN] button on the
remote control.
The following screen is displayed.
b
Check that the SSID and IP address information are displayed, and
then remove the wireless LAN unit.
s "Installing the Wireless LAN Unit" p.34
c
Insert the Quick Wireless Connection USB Key in the wireless LAN
unit installation section.
d
When the message "Network information update complete.
Remove the Quick Wireless Connection USB Key Adapter." is
displayed, remove the Quick Wireless Connection USB Key.
After removing the Quick Wireless Connection USB Key, reattach
the wireless LAN unit.
e
Connect the Quick Wireless Connection USB Key to the computer.
From this point on, see the user's guide supplied with the Quick
Wireless Connection USB Key.
Network Functions
126
To Next Page
Loading...
Need help?
General
