Epson EB-4750W User Manual

A
[ ] button
Turns the projector on.
B
Change input buttons
s "Switching to the Target Image by Remote Control" p.39
C
[Freeze] button
s "Freezing the Image (Freeze)" p.57
D
[A/V Mute] button
s "Hiding the Image and Sound Temporarily (A/V Mute)" p.56
E
[Page] buttons
s "Remote Control" p.12
F
[Volume] buttons
G
[Source Search] button
s "Automatically Detect Input Signals and Change the Projected Image
(Source Search)" p.38
H
[t] button
Turns the projector off.
ESC/VP21 Commands
You can control the projector from an external device using ESC/VP21.
Command list
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
The main contents are listed below.
Item Command
Power ON/OFF
On PWR ON
Off PWR OFF
Signal selection
Computer Auto SOURCE 1F
RGB SOURCE 11
Component SOURCE 14
BNC Auto SOURCE BF
RGB SOURCE B1
Component SOURCE B4
HDMI SOURCE 30
Video SOURCE 41
S-Video SOURCE 42
LAN SOURCE 53
DisplayPort SOURCE 70
Monitoring and Controlling
130

Epson EB-4750W Specifications

General

Brand	Epson
Model	EB-4750W
Category	Projector
Language	English