If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below.
See the following if the indicators do not show clearly what the problem might be.
s "When the Indicators Provide No Help" p.99
Reading the Indicators
The projector is provided with the following four indicators that indicate the operating status of the projector.
A
Power indicator Indicates the operating status.
Standby condition
In this status, you can start projecting by pressing the [
] button on the remote control, or the [
t
] button
on the control panel.
Preparing for network monitoring or cool down in progress
All buttons are disabled while the indicator is flashing.
Problem Solving
95
To Next Page
Loading...
Need help?
General
