Projector Network Settings - Network Menu
141
Setting Options Description
Connection Mode Select the type of wireless connection:
Quick Quick: lets you connect to multiple
smartphones, tablets, or computers
directly using wireless communication.
When you select Quick connection
mode, the projector acts as an easy access
point. (We recommend limiting the
number of devices to six or less to
maintain the projection performance.)
Advanced Advanced: lets you connect to multiple
smartphones, tablets, or computers over
a wireless network access point.
Search Access Point To Search View Search for available wireless network
access points in Advanced connection
mode. Depending on the access point
settings, they may not be displayed in the
list.
SSID Up to 32
alphanumeric
characters
Sets the SSID (network name) of the
wireless LAN system the projector is
connecting to.
Security Selects the type of security used on the
wireless network.
When setting security, follow the
instructions from the administrator of
the network system you want to connect
to.
Open Security is not set.
WPA2-PSK Communication is performed using
WPA2 security. Uses AES method for
encryption. When establishing a
connection from a computer to the
projector, enter the value set in the
passphrase.
Setting Options Description
WPA3-PSK Communication is performed using
WPA3 security. Uses AES method for
encryption. When establishing a
connection from a computer to the
projector, enter the value set in the
passphrase.
WPA2/WPA3-PSK Connects in WPA2/WPA3 personal
mode. Encryption method is selected
automatically according to the access
point settings. Set a passphrase which is
the same for the access point.
WPA3-EAP Connects in WPA3 enterprise mode.
Encryption method is selected
automatically according to the access
point settings.
WPA2/WPA3-EAP Connects in WPA2/WPA3 enterprise
mode. Encryption method is selected
automatically according to the access
point settings.
Passphrase Various
passphrases from 8
to 32 characters
(when entering
from a Web
browser: various
passphrases from 8
to 63 characters)
For WPA2-PSK, WPA3-PSK and
WPA2/WPA3-PSK security, selects the
pre-shared passphrase used on the
network.
When the passphrase is entered and the
[Enter] button is pressed, the value is set
and displayed as an asterisk (*).
We recommend changing the passphrase
periodically for security. If the network
settings are initialized, it returns to the
initial passphrase.
EAP Method Set the EAP settings for WPA3-EAP and
WPA2/WPA3-EAP security.
To Next Page
Loading...
Need help?
General
