Projector Connections
20
f
Place the streaming media player as shown.
• USB port on the side
• USB port at the bottom
g
Replace the rear cover.
a
If your streaming media player supports the HDMI CEC standard, you
can operate some of the player's functions by using the projector's
remote control. See your streaming media player's manual for details.
Connecting to Video Sources
If your video source has an HDMI port, you can connect it to the projector
using an HDMI cable and send the image source's audio with the projected
image.
Attention
Do not turn on the video source before connecting it to the projector. Doing so
could damage the projector.
a
• If the port on the device you connect has an unusual shape, use the
cable supplied with the device or an optional cable to connect to the
projector.
• Some video equipment is capable of outputting different types of
signals. See your video equipment manual to confirm what type of
signals can be output.
a
Remove the rear cover from the projector.
b
Connect the HDMI cable to your video source's HDMI output port.
To Next Page
Loading...
Need help?
General
