Turning Off the Projector
28
Turn off the projector after use.
a
• Turn off this product when it is not in use to prolong the life of the
projector. Light source life varies depending on the environmental
conditions and usage. Brightness decreases over time.
• Since the projector supports the direct shutdown feature, it can be
turned off directly using the breaker.
a
Press the power button on the control panel or remote control.
The projector displays a shutdown confirmation screen.
b
Press the power button again. (To leave it on, press any other button.)
The light source turns off, and the status indicator turns off.
c
To transport or store the projector, make sure the power indicator is
blue (but not flashing) and the status indicator is off, then unplug the
power cord.
a
You can keep supplying power to the streaming media player even if
the projector is in standby mode by selecting On as the USB Power in
Standby setting. This lets the device start earlier, or perform updates
automatically over a network if necessary.
s Settings > Operation > USB Power in Standby
gg Related Links
• "Projector Feature Settings - Settings Menu" p.61
To Next Page
Loading...
Need help?
General
