Projector Information Display - Info Menu
64
You can display information about the projector and version by viewing the
Info menu. However, you cannot change any settings in the menu.
Information item Description
Projector Info Displays the projector information.
Light Source Info Displays the number of operating hours for the
projector's light source.
Version Displays the projector's firmware version.
gg Related Links
• "Info Menu - Projector Info Menu" p.64
Info Menu - Projector Info Menu
You can display information about the projector and input sources by viewing
the Projector Info menu in the projector's Info menu.
Information item Description
Total Op. Time Displays the number of hours the projector has been
used in its operating life.
Operation Hours Displays the number of hours the projector has been
used since it was turned on.
Source Displays the name of the port to which the current
input source is connected.
Input Signal Displays the input signal setting of the current input
source.
Resolution Displays the resolution of the current input source.
Refresh Rate Displays the refresh rate of the current input source.
Sync Info Displays information that may be needed by a service
technician.
Status Displays information about projector problems that
may be needed by a service technician.
To Next Page
Loading...
Need help?
General
